Sometimes in very rare cases, using Master Drive Mode is still not working correctly you should try other Mode.Ĥ) Follow the instruction for your CB-ISATAU2 or CB-ISA225-U3 for connecting the power supply ONLY to the drive. Make sure the hard drive is set into MASTER Drive Mode only. Check the instruction on the label of the drive, it should show the jumper setting for a different setup like Master, Slave, CS (Cable Select) setting. It prevents the ac adapter from functioning and providing power to the drive to spin up.ģ) For a 3.5” IDE drive, there are jumpers in the drive that may need to change for it to work correctly with this adapter. This is caused by a circuit loop between the drive with the USB adapter and it will short out the ac adapter. It works with all SATA drive sizes and has very good user ratings.On rare conditions using CB-ISATAU2 or CB-ISA225-U3 adapter, the 3.5' IDE will not spin up when connected to power and the USB adapter. One good bet is the Sabrent USB-DSC7, which TigerDirect currently has on sale for $24.99. There are lots of these kinds of adapters out there. You may not need it now, but it’s a good bet your next PC will have USB 3.0 ports - and that’ll make for much faster copying between drives. At the same time, I recommend one that supports USB 3.0. Unless you have a pretty old desktop or laptop, you can skip buying a USB-to-IDE/SATA adapter and just go for USB-to-SATA.

Then you’ll remove the old drive, install the new one, and presto, you’re back in business. clone) your existing drive to the new SSD. Unless you buy a kit that comes with an adapter, you’ll need one so you can image (i.e. There’s another reason to keep one of these adapters on hand, and that’s if you’re planning to upgrade to a solid-state drive (SSD). Except for the hassles (and expense) of actually replacing the drive, no harm done. Huzzah! The machine was able to read the drive and copy over the recordings.

Usb to sata adapter best buy